Norton Prosand Multi - Air Cyclonic Orbital Sanding Disks Box of 50

FLOOR SANDING
HOOK AND LOOP ORBITAL DISCS

Universally
DUST FREE!

FEATURES & BENEFITS
• Spiral-hole hook & loop vacuum design removes material
consistently while maximizing dust extraction for a
cleaner work environment

• Features a No-Fil coating to resist clogging/loading during sanding

• Specialized multi-hole pattern allows for use on any random
orbital sander regardless of hole pattern - including unique
Festool* sander models

• Unique fiber-reinforced latex/paper backing is flexible, strong,and tear-resistant

Ideal for removing
edger marks and
sanding stair treads

Orbital discs are used
on hand-held machines
for final sanding of
edges and stair treads

NORTON PROSAND MULTI-AIR CYCLONIC DISCS
BEST CHOICE FOR PRO RESULTS WITH A POWER TOOL

Premium ceramic alumina abrasive provides superior cut on
all surfaces, lasts substantially longer and cuts faster than
conventional abrasives and has been open coated to resist
clogging and loading during sanding. Universal multi-hole pattern
fits all 5" and 6" random orbital sanders. Ideal for tight spots and
stair treads.

PART # GRIT STD. PKG.
5" x Multi-Hole Hook & Sand
076607 04041 0 P320 50 / 200
076607 04038 0 P220 50 / 200
076607 04037 3 P180 50 / 200
076607 04036 6 P150 50 / 200
076607 04035 1 P120 50 / 200
076607 04034 2 P100 50 / 200
076607 04033 5 P80 50 / 200
666233 74368 1 P60 50 / 200
076607 68279 5 P40 50 / 200

PART # GRIT STD. PKG.
6" x Multi-Hole Hook & Sand
076607 05483 8 NS P320 50 / 200
076607 05484 4 P220 50 / 200
076607 05485 2 NS P180 50 / 200
076607 05486 8 P150 50 / 200
076607 05487 5 P120 50 / 200
076607 05488 2 P100 50 / 200
076607 05489 1 P80 50 / 200
076607 05490 5 P60 50 / 200

ORBITAL DISC GRIT GUIDE

GRIT BASIC APPLICATION
Extra Fine (320) For primer, sealer and between coats sanding
Very Fine (220) For very fine sanding of bare surfaces, primer and sealer sanding
Fine (180) For finish sanding and cleaning of bare surfaces
Medium (150/120/100) For light removal and smoothing of bare surfaces
Coarse (80/60) For moderate removal and levelling of surface imperfections

TECH TIP

To remove swirl marks left from
edging. Consider sanding the edges
with an orbital sander. For best
results and to avoid halos, use the
same grit on the orbital sander as
you previously used on the edger.
The super sharp ceramic alumina
grain will easily remove edger marks
and produce a scratch free finish.