Lignomat BL2 Moisture Meter Memo-Chip BL2 Data-Logger
Humidity data loggers provide more information than single readings from a thermo-hygrometer. Install a BL2 to keep track continuously.
–Relative humidity and ambient temperature
–DPT (dew point temperature)
–GPP (grains per pound)
–EMC (equilibrium moisture content for wood)
–Add MC Tracker to simultaneously record 1 RH probe and 3 wood
—moisture measuring probes.
When humidity matters: Each BL2 comes with the high-precision RH BluePeg Probe with long-term stability. The detachable RH Probe allows for inwall, in-depth monitoring. LED lights and audible alarms can be set to indicate out-of-range values. Selectable time-interval 30 sec to 24 hrs.
The BL2 records 16000 data sets. Reports show:
Relative Humidity, Temperature, Grains per Pound, Dew Point and EMC .
Specifically for Contractors and Restoration Specialists:
For job-site surveillance and long term monitoring. Alarms can be set to alert when unwanted conditions occur. Extension cables (standard stereo cable and 3.5mm connector) allow mounting the RH probe where it can best measure and the BL2 where it can be reached easily.
Specifically for Wood: For customers concerned about wood moisture we added EMC values plus an EMC alarm. The alarm will sound when the humidity gets lower or higher than the preset alarm EMC value.
Options:
-
unique MC Tracker to also monitor moisture in wood,…
- Wireless transmitters with remote Internet access.
- Hand-held Thermo-Hygrometer PN.
Memo-Chip BL2 Package:
Data Logger, RH BluePeg Probe, RH Adapter, RH Cable 6ft, USB Cable, BluePeg Bracket,
BL2 Bracket, 3 BL 2 Hangers, 2 screws,
BL2 Data-Logger Package
|
Memo-Chip |
Interval 30sec – 24 hrs 32000 data sets Lithium Battery, exchangeable LED alarm audible buzzer alarm, selectable size: 1″x1.25″x4″ (2.5cmx3cmx10cm) USB cable and RH cable connectors |
|
RH Probe |
Size: Diameter 0.5″, length 1.4″ (13x36mm) |
RH Measurements |
±2% for 10-90%+ ±3% for 0-10% and > 90% |
Temperature Measurements |
±0.5°F for 32°F to 120°F+ ±1°F less 32°F to 5°F+ ±1°F above 120°F to 160°F |
Parts List |
1 BL2 unit with black mounting bracket 1 RH BluePeg Probe with white mounting bracket 6 ft RH Cable with 3.5mm stereo plugs 1 Adapter RH 3 ft USB Cable Screws for mounting brackets Manual |
Memo-Chip BL2 – Interval 30sec – 24 hrs
32000 data sets, LED and audible alarm
Lithium Battery, exchangeable
size: 1″x1.25″x4″ (2.5cmx3cmx10cm)
built-in connectors for USB and RH cables
Black Mounting Bracket for horizontal wall mount (2 screws incl)
Plastic Hanger for vertical and horizontal wall mount
RH Probe Size: Diameter 0.5″, length 1.4″ (13x36mm)
RH: ±2% for 10-90%, ±3% for 0-10% and > 90%
T: ±0.5°F for 32°F to 120°F, ±1°F less 32°F to 5°F and above 120°F to 160°F
Adapter RH with 2 male 3.5mm connectors for a direct connection of RH BLuePeg Probe the Memo-Chip BL2
RH Cable 6ft long, with 2 male 3.5mm connectors to connect RH BLuePeg Probe to Memo-Chip BL2.
Mounting Bracket for RH BluePeg (1 screw incl.)
USB Cable to connect Memo-Chip BL2 to a PC to download data.