Stainless Steel Shower Shelf, Corner - Triangle (Brushed Brass)

• 5/32" (4 mm) thick brushed stainless steel shower shelf
• 1/16" (1.5 mm) thick rounded tabs
• Easy installation in grout line between tiles
• No drilling required. Just use silicon between grout joint

INSTALLATION INSTRUCTIONS

New Tile Installation

1. Install wall tile with joint spacing of 1/16″ (1.5 mm) or larger.
2. Install grout leaving the area (corner) where the shelf will be installed open.
3. After the grout has set, fill the open corner with silicone or another appropriate sealant.
4. Insert the shelf into the wall and add temporary support to hold the shelf if needed.
5. Apply silicone or another appropriate sealant to both the top and bottom joint between the shelf and wall tile.

 After Tile Installation

1. Mark the grout where the four shelf tabs will be inserted.
2. Remove grout from these four areas using an appropriate grout removal tool.
3. Fill the four openings in the grout joint with silicone or another appropriate sealant.
4. Insert the shelf into the wall and add temporary support to hold the shelf if needed.
5. Apply silicone or another appropriate sealant to both the top and bottom joint between the shelf and wall tile.