Get an Extra 2% Off Total Order

Waterlox TB6050HP Raw Tung Oil Half Pint 8 Oz.

Price
$30.78
Taxes and shipping calculated at checkout
In stock and ready for shipping
American Express
Apple Pay
Diners Club
Discover
Meta Pay
Google Pay
Mastercard
Shop Pay
Visa
Waterlox TB6050HP Raw Tung Oil Half Pint 8 Oz.

Waterlox TB6050HP Raw Tung Oil Half Pint 8 Oz.

Price
$30.78

Product information

Brand Waterlox Coatings
Title Waterlox TB6050HP Raw Tung Oil Half Pint 8 Oz.
  • Waterlox Pure Tung Oil is 100% pure tung oil with no additives or driers.
  • Produces a matte sheen appearance.
  • Highlights and richens the natural beauty of wood.
  • Penetrates into the wood fibers.
  • Water and heat resistant after a minimum of 7 days.
  • Ideal for wood surfaces that do not require a film such as: salad bowls, butcher blocks, chopping boards, furniture (other than table tops), gun stocks, jewelry cases, wooden figurines, bowl turnings, etc. Can be used on wood floors.
  • Made in the USA
  • Use on non-working wood surfaces that do not require a protective film, such as salad bowls, butcher blocks, chopping boards, furniture (other than table tops), gun stocks, jewelry cases, wooden figurines, bowl turnings, etc. Can be used on wood floors.
  • DRY/CURE TIME: 4 hours between coats when thinned. Wait a full 24 hours for the final coat to dry. Allow the coating to cure for a minimum of 7 days before subjecting it to use or water. Full cure is achieved at 30 days.
  • COVERAGE/THINNING: Waterlox 100% Pure Tung Oil is infinitely soluble in regular or odorless Mineral Spirits, (do NOT use low-odor, green or low-VOC types of solvents), paint thinner and citrus solvent. Do not thin with Acetone or Lacquer Thinner. It is advisable to thin the product at least 3:1 for ease of application. If and when you thin the product, you are changing the VOC Content; be sure to check with your local authorities with regard to VOC limits for Architectural projects.
  • SURFACE PREPARATION & APPLICATION: Waterlox 100% Pure Tung oil may alter the appearance, conduct a test by applying all intended coats on a scrap piece or an inconspicuous area before beginning. USE ON BARE WOOD ONLY. Proper sanding techniques should be followed prior to using, finish sand to a 100-150 grit.
  • NEW WOOD APPLICATION: Use a china-bristle brush, steel wool or a lint-free cloth to apply Waterlox 100% Pure Tung Oil. Allow a thin coat of the oil to penetrate for 10 minutes and then wipe off the excess oil using a clean, lint-free cloth. Allow to dry for at least 4 hours. Continue to apply the oil in thin coats (wiping off excess oil) until desired fill or gloss is achieved. Wait 24 hours for the final coat to dry.
  • Due to VOC regulations, many Waterlox Sealers or Finishes may not be sold in your area. Your zip code will be checked before shipping this product.

     

    Please see more information at https://www.floorsupplies.net/pages/voc-compliant-vs-traditional-formulations-1

Archaeology Tools

Archaeology Tools

Asphalt Tools

Asphalt Tools

Masonry Tools

Masonry Tools

Industrial Cleaning Equipment

Industrial Cleaning Equipment

Woca Denmark Wood Care

Wood Care & Supplies

Measuring & Marking Tools

Measuring & Marking Tools

Tub/Shower Trim Kits

Tub/Shower Trim Kits

Toilet Tank Repair Kits

Toilet Tank Repair Kits

Tub Stoppers

Tub Stoppers

Stems

Stems

Tub & Shower

Tub & Shower

Cartridges

Cartridges

Automotive Tools

Automotive Tools

Bits & Drivers

Bits & Drivers

Clamping Tools

Clamping Tools

Screwdrivers

Screwdrivers

Tool Kits

Tool Kits

Tool Storage

Tool Storage

Chandeliers

Chandeliers & Pendants

Sculptures

Sculptures & Décor

Bathroom & Kitchen Appliances

Bathroom & Kitchen Appliances

Area Rugs

Area Rugs

Wall Plates & More

Wall Plates & More

Vent Covers

Vent Covers