Get an Extra 2% Off Total Order

Waterlox Original Wood Cleaner Concentrate 10oz

Price
$18.18
Taxes and shipping calculated at checkout
In stock and ready for shipping
American Express
Apple Pay
Diners Club
Discover
Meta Pay
Google Pay
Mastercard
Shop Pay
Visa
Waterlox Original Wood Cleaner Concentrate 10oz

Waterlox Original Wood Cleaner Concentrate 10oz

Price
$18.18

Product information

Brand Waterlox Coatings
Title Waterlox Original Wood Cleaner Concentrate 10oz
  • Use with oil products and other finishes not affected by water.
  • Will not damage the gloss or film of most finishes.
  • Effective at neutralizing harsh cleaner residues left behind from other cleaners.
  • Enhances the beauty of wood surfaces when dry.
  • Will dissolve all ice melt and hard water films.
  • Will never leave a soap haze.
  • For General Cleaning: Dilute 1-2 ounces of concentrate per gallon of warm water.
  • For Heavy Duty Cleaning: Dilute 2-4 ounces of concentrate per gallon of warm water.
  • Available in quart (32 ounces) concentrate.

Use with oil products and other finishes not affected by water.

Cleaning and maintenance of a Waterlox finished floor.

 

After the Waterlox Original Tung oil finish has dried and cured for at least 7 days, cleaning may be performed. For floors, we recommend using a broom, damp mop or microfiber mop on the surface as needed.

When a heavier cleaning is required for floors we suggest any of the following methods:

  • Waterlox Original Cleaner Concentrate (following the directions on the label). We do NOT recommend the use of other wood coating manufacturer’s cleaners as these have been proven to damage all types of wood finishes including Waterlox Original Tung oil finishes; or
  • A damp mop with a maximum mixture of 1 - 2 oz. of white vinegar to 2 gallons of warm water; or
  • Non-abrasive diluted household cleaner (stay away from ammonia and/or bleach products); or
  • Murphy’s Oil Soap® can be used, but will tend to reduce the gloss by leaving a film on the surface.1

Tip:

After cleaning any surface finished with Waterlox Original Tung oil finishes, rinse with clear water.

Avoid ammonia-based cleaners and products containing wax or acrylics, and try to prevent water from pooling or standing on the surface for long periods of time. We believe wax creates time-consuming maintenance issues, scuffs easily, leaves water spots and attracts dirt. Wax also makes it difficult to recoat your wood surface with Waterlox when necessary. Even though waxes are compatible with Waterlox finishes, we don’t recommend using them for the aforementioned reasons.

1 Residue of any type including Murphy’s Oil Soap® should be removed by a mixture of TSP (trisodium phosphate) and water, followed by a clear water rinse before re-coating.

 

Archaeology Tools

Archaeology Tools

Asphalt Tools

Asphalt Tools

Masonry Tools

Masonry Tools

Industrial Cleaning Equipment

Industrial Cleaning Equipment

Woca Denmark Wood Care

Wood Care & Supplies

Measuring & Marking Tools

Measuring & Marking Tools

Tub/Shower Trim Kits

Tub/Shower Trim Kits

Toilet Tank Repair Kits

Toilet Tank Repair Kits

Tub Stoppers

Tub Stoppers

Stems

Stems

Tub & Shower

Tub & Shower

Cartridges

Cartridges

Automotive Tools

Automotive Tools

Bits & Drivers

Bits & Drivers

Clamping Tools

Clamping Tools

Screwdrivers

Screwdrivers

Tool Kits

Tool Kits

Tool Storage

Tool Storage

Chandeliers

Chandeliers & Pendants

Sculptures

Sculptures & Décor

Bathroom & Kitchen Appliances

Bathroom & Kitchen Appliances

Area Rugs

Area Rugs

Wall Plates & More

Wall Plates & More

Vent Covers

Vent Covers