PRODUCT DESCRIPTION: A transparent, tough, oil-based finish formulated to provide excellent durability and remarkable stain resistance. DURA SEAL™ Polyurethane gives wood floors depth and richness while protecting them from dint and spills. Available in three sheens and aerosol Touch-Up Spray, as well as 450 VO.C. (NY/NJ) compliant formulas.
Special authorization required to purchase
Description
DuraSeal® Touch-Up Spray is a self-leveling transparent, tough finish formulated to repair wood floor finishes. It is available in gloss, semi-gloss and satin. This product contains no CFC's.
Precaution
Do not use over shellac, lacquer or stains containing wax or stearates.
Surface Preparation
- Sand old, worn, or damaged area until surface is dull. Be sure to feather edge the sanding to avoid lap-marks.
- Remove all dust with a cloth dampened with mineral spirits and allow to dry.
Application
- Shake can vigorously for one minute after pellets are loose in can.
- Hold can vertically approximately 12 inches from surface.
- Move can evenly across surface with slightly overlapping strokes. NOTE: Apply in thin uniform coats.
- Let dry at least 12 hours before subjecting to traffic.
Clean-Up
Mineral Spirits.
Storage
CONTENTS UNDER PRESSURE. Avoid prolonged exposure to sunlight or heat from other sources that may cause bursting. Do not store above 1200F.
Manufacturer: Dura Seal
MPN: 83310000
SKU: 3824
UPC: 027426833104
Unit of Measure: Each
Sign In
