Shopping Cart
View Cart
Checkout
# of Item(s): 0
Total: $0.00

Categories


The Flooring Connection

Nextag Seller

Floor Supplies is an Upfront Merchant on TheFind. Click for info.

Bookmark this page
AFM Safecoat Deckote White Gallon
 

AFM Safecoat Deckote White Gallon

Price: $59.90
This item is in stock
Quantity:
Brief Description
Detailed Description
Specifications

Deckote White - Gallon

DESCRIPTION: Safecoat DecKote is a unique waterborne coating for use on dimensionally stable decks including concrete, magnesite, walkways, breezeways and patios. Safecoat DecKote dries to a hard, tough coating yet contains no offensive solvents, fumes or odors. It dries quickly, cleans up with water and provides a tough monolithic film for lasting protection on properly prepared surfaces. Standard in white, colors available on special order.

USE ON: Concrete and magnesite. Also suitable for properly primed metal.

SURFACE PREPARATION:

Unpainted concrete/magnesite: New surfaces should age thirty days before coating for best results. Scrub surface with a solution of SafeChoice Super Clean and water. Use 6 oz. of Super Clean per gallon of water. Triple rinse to assure residue is completely removed. Use water with some pressure. For the very best adhesion, acid etching may be required, followed by completely neutralizing the surface. Use extreme caution when working with acid.

Metal: Surfaces must be primed before applying Safecoat DecKote. Use a safer metal primer such as AFM MetalCoat.

APPLICATION: Always have adequate ventilation. Apply in two uniform coats. The surface should be completely dry before application. Before using, stir well, then apply as is, using a high quality nylon or synthetic bristle brush or roller of appropriate nap (1/4”-3/8” nap recommended). For spraying, reduce with up to 1/2 pint of water per gallon. Use an airless sprayer, minimum 2000 p.s.i., with a .015-.017 tip. Use a 60 mesh filter. Always use a painter’s mask when spraying. Do not apply on cold, damp days or when the air or surface temperature is below 55 degrees F. No thinning is required. A small amount of water may be added to help in the application of thinner coats.

COVERAGE: One gallon of Safecoat DecKote covers approximately 350 square feet in one coat depending on surface porosity.

CLEAN-UP: Clean tools and equipment while they are still wet with a solution of SafeChoice Super Clean and warm water. If Safecoat DecKote is allowed to harden on tools, it will be necessary to use lacquer thinner or stronger solvents.

DRYING / CURING TIME: Under normal conditions, Safecoat DecKote dries to touch in 4-8 hours. Allow 24 hours between coats.
WARNING: Surfaces can become slippery when wet with water, oil or grease. Safecoat DecKote can be supplied with an inert mineral aggregate additive to reduce slipperiness. The aggregate itself is available and can be added separately. For greater safety in traffic areas, particularly on steps and stairs, it is important that aggregate be added to product or sprinkled on first coat of Safecoat DecKote while it is still wet. This will assist in providing a slip-resistant surface.

Featured Categories
Alta Protection Products
Alta Protection Products
Knee Protection Elbow Protection
Freeman Tools And Flooring Nailers
Freeman Tools And Flooring Nailers
The Freeman Advantage - Freeman Tools is where quality and value meet to give you the best of both worlds. Our products are designed from the ground up to professional specifications using superior materials which results in a high quality product.
KP Industries Tactical Knee Pads
KP Industries Tactical Knee Pads
KP Industries is a nation wide company dedicated to the design, engineering, and manufacturing of the best products on the market today. Our unique products are ergonomically designed for optimum comfort and safety for the user. This coupled with the quality materials, manufacturing, and assembly, done at our facility in the US, results in a superior product.
Lagler Sanding Machines
Lagler Sanding Machines
From the legendary HUMMEL® to the single disc sanding machine SINGLE, LÄGLER offers the most comprehensive and highest quality range of machines available for professional floor finishing. All our floor sanding machines have the most sophisticated technology for quick, environmentally friendly and perfect finishing of wooden floors and thus offer the greatest investment security possible.

Return to Catalog