Shopping Cart
View Cart
# of Item(s): 0
Total: $0.00


The Flooring Connection

Nextag Seller

Floor Supplies is an Upfront Merchant on TheFind. Click for info.

Bookmark this page
Afm Safecoat Waterbased Transitional Paint Primer 5- Gallon
Afm Safecoat Waterbased Transitional Paint Primer 5- Gallon
Afm Safecoat Waterbased Transitional Paint Primer 5- Gallon

Afm Safecoat Waterbased Transitional Paint Primer 5- Gallon

Price: $268.90
This item is in stock
Brief Description
Detailed Description

Transitional Primer - 5 Gallon

DESCRIPTION: Safecoat Transitional Primer is a premium quality, waterbased, flat finish universal primer specifically formulated to solve difficult application problems without the use of toxic and malodorous chemicals. It is particularly well suited for transitioning from existing oil based painted surfaces to waterbased coatings. Because it has an extremely tight and efficient polymer network, it is when properly applied useful as a stain blocker for many of the knot holes, water soluble stains and oils, tannins and terpenes in wood which can “bleed through” to the surface upon the application of traditional waterbased primers. Like all Safecoat paints, it is the least toxic product of its type, and contains no naphtha or other aromatic solvents, and no formaldehyde, ethylene glycol, ammonia, acetone, heavy metals, crystalline silica or other carcinogenic or hazardous materials. Safecoat Transitional Primer is naturally low in odor, and unlike other paints contains no masking agents or fragrances to hide the smells of toxic chemicals.

USE ON: Most interior and exterior surfaces: walls, ceilings, wood and wood trim, fully cured plaster, stucco, masonry and drywall.


  • Unique molecular structure promotes strong penetration and mechanical adhesion.
  • Environmentally friendly - very low VOC, the lowest toxicity for a product of its type.
  • Tight polymer network makes an excellent sealer.
  • “Transitions” oil based surfaces to accept waterbased coatings.
  • Good stain blocker, reduces bleed through.
  • Durable, high performance undercoating.
  • Low odor.
  • Contains no formaldehyde or aromatic hydrocarbons.
  • Fights indoor air pollution.


SURFACE PREPARATION: Careful surface preparation is important. Surfaces to be coated with Safecoat Transitional Primer should be sanded and cleaned of dirt, grease, mildew and oil. Cleaning with an odorless, dye free, all purpose cleaner like SafeChoice Super Clean is recommended. Previously painted surfaces in poor condition should be scraped and sanded smooth before priming. Always spot test for adhesion over prior coatings. Surface should be completely dry before application.

APPLICATION: Surfaces painted with oil based coatings should be sanded to promote adhesion (all gloss must be removed). Wet sanding is recommended. USE CAUTION WHEN SANDING: some old paints contain lead and must not be handled in such a way as to introduce lead into the environment or expose workers to lead (primarily dust) through means of sanding or abrasion. Knot holes and water stains should be spot primed before undercoating the entire surface. Always have adequate ventilation. Before using, stir Safecoat Transitional Primer well, then apply as is. For spraying, reduce with up to 1/2 pint of water per gallon. Use a painter’s mask when spraying. May be applied with a brush, roller or airless sprayer. Use a high quality nylon brush. A quality roller cover with a nap height of 1/4” to 1/2” is recommended. (Note: high pile heights will add additional texture.) Airless sprayers should have a 17/1000 to 21/1000 tip (reversible type is best). Only a 30 mesh high pressure filter should be used. Use a painter’s mask when spraying. For full coverage application, overlap preceding application with 1/4 to 1/2 the fan width at a distance of 18” from surface. Do not apply on cold, damp days or if surface, container or air temperature is below 55 degrees.

COVERAGE: One gallon of Safecoat Transitional Primer covers approximately 300-350 square feet in one coat depending on method of application and surface texture and porosity. One full coat is generally sufficient for most jobs, such as for transitioning from oil based surfaces to waterbased coatings. Some stains may require two coats for complete blocking; the primer may absorb the stain into itself on the first coat, where it will be “locked up” and blocked by the second.

CLEAN-UP: Clean tools and equipment while they are still wet with a solution of SafeChoice Super Clean and warm water.

DRYING/RECOATING TIME: Under normal conditions, Safecoat Transitional Primer dries to touch within one hour. For best results wait at least 8 hours before recoating or finish coating when transitioning from oil to water. For stain blocking, allow primer to cure overnight before recoating. This product will continue to develop increased adhesion over a full 7 day cure cycle. Normal conditions include a dry surface, access to fresh air flow, moderate humidity, and temperatures above 55 degrees F. Thick application, high humidity or conditions other than normal will cause Safecoat to dry and cure more slowly.

Featured Categories
Alta Protection Products
Alta Protection Products
Knee Protection Elbow Protection
Freeman Tools And Flooring Nailers
Freeman Tools And Flooring Nailers
The Freeman Advantage - Freeman Tools is where quality and value meet to give you the best of both worlds. Our products are designed from the ground up to professional specifications using superior materials which results in a high quality product.
KP Industries Tactical Knee Pads
KP Industries Tactical Knee Pads
KP Industries is a nation wide company dedicated to the design, engineering, and manufacturing of the best products on the market today. Our unique products are ergonomically designed for optimum comfort and safety for the user. This coupled with the quality materials, manufacturing, and assembly, done at our facility in the US, results in a superior product.
Lagler Sanding Machines
Lagler Sanding Machines
From the legendary HUMMEL® to the single disc sanding machine SINGLE, LÄGLER offers the most comprehensive and highest quality range of machines available for professional floor finishing. All our floor sanding machines have the most sophisticated technology for quick, environmentally friendly and perfect finishing of wooden floors and thus offer the greatest investment security possible.

Return to Catalog