Bar Top and Table Top Clear Epoxy Resin 4 Gallons

"This was my first time ever using epoxy and I couldn’t be happier with the results. Even with no experience I found the instructions were simple to follow but completely thorough. The surface looks like glass!" Bryan Martin - Miami, Florida

One of the best parts about our tabletop epoxy is that it is very easy to work with. No experience needed. Even if you have never worked with epoxy before, you can follow the instructions given in our how-to guides and complete your project successfully.

Click here to use our Epoxy Coverage Calculator

For most applications, UltraClear Epoxy is applied in two stages, the Seal Coat stage and the Flood Coat stage.

Seal Coat: The seal coat is a small batch of epoxy that is brushed on in a thin layer to seal any pores in the surface and prevent air bubbles from forming in the following flood coat. Our epoxy is used for both the seal coat and the flood coat. It is the same product that is applied to the surface with a paint brush.

Flood Coat:  After waiting 4-6 hours from when the seal coat was applied, a flood coat is simply poured on the surface and it self-levels to 1/8" thick.

Side and Edges: When pouring over the Sides and Edges of a table, counter, or bar top, make sure that you purchase extra material to account for spillage over the sides as you will lose 30% of the material coating them.

Get our Basic Epoxy Tool Kit for superior epoxy results! Blend epoxy resin and hardener perfectly using the included mixing drill bit.

*Covering embedded objects will require additional epoxy. Make sure you have accounted for this.

**The calculations below are (either) (or) for the seal coat and flood coat. Example: 1 gallon will cover either 16 sq.ft. for a flood coat or 48 sq.ft. for a seal coat, NOT BOTH. These calculations are not intended to give more than a rough estimate. Precise epoxy needs will vary according to many factors, including application type and surface material.