Did your finish dry out? Skin over? Thicken? Some of these products are $100 or more a gallon now.
BLOXYGEN is a pressurized can of inert gas that prevents finishing liquids from drying out during storage.
PROBLEM: Oxygen or moisture sensitive products dry out, cure, and harden during storage. When we store these products, the oxygen or moisture that's sealed in the container continues to cure and thicken the product, eventually forming a skin over the top. This skin is wasteful, time consuming, and messy to remove. Sometimes, hardened particles can clog spray guns, run the final finish, or destroy the remaining liquid.
SOLUTION: Simply, we need to prevent any oxygen or moisture from reacting with the product. By using a blanket of protective inert gas to purge the container, you can store your finish safely and use ALL your finish, not just the first half
HOW DOES IT WORK?
Bloxygen uses ultra pure Argon, a powerful and natural inert gas to drive the oxygen out of your container. Simply blow the oxygen out of your container with Bloxygen and then seal the lid. The heavy, inert Bloxygen gas sinks down to block oxygen from the liquid surface. Because Bloxygen is heavier than air, it will separate the liquid surface from any air that may remain in the container.
Use all your finish, not just the first half
Eliminate spray gun clogs and jams
Reduce your hazardous waste / product loss
Avoid paying a premium for small volumes of finish
Improve the quality of the final application
Prevent changes in product chemistry during storage
Save time by making finishing projects easier and cleaner
Store your leftovers safely, in the original, labeled container
Use Bloxygen any time you are storing:
Oil based paint
Auto body Chemicals
Furniture Refinishing Chemicals
Bloxygen will NOT HELP problems with WATER-BASED FINSIHES or LACQUER. These products don't cure via oxygen absorption.